LEEA Appointed Person for Lifting Operations (APLO)

LEEA APPOINTED PERSON FOR LIFTING OPERATIONS (APLO)
Home Courses LEEA APPROVED COURSES LEEA Appointed Person for Lifting Operations (APLO)
Appointed Person for Lifting Operations (APLO)

Are you prepared to take full legal and operational control of all lifting operations on site? The LEEA Appointed Person for Lifting Operations (APLO) certification is the global benchmark for professionals who plan, supervise, and ensure the safe execution of both routine and complex/critical lifts. Talent Training Institute is the trusted provider—the Best LEEA Accredited Training Provider for APLO in the UAE. Our focus is not just on the certificate; it is on developing a competent, analytical Appointed Person (AP) who can prevent accidents and ensure total regulatory compliance (LOLER)

TAlent
TAlent
TAlent
TAlent
TAlent
TAlent
TAlent
Talent Training INSTITUTE
TAlent

Who is an Appointed Person?

For a lifting operation to be conducted safely and efficiently, the Appointed Person (AP) must thoroughly assess, analyze, calculate, and establish a clear procedure. This includes detailing the method for executing the lifting operation in compliance with industry best practices and regulatory standards. The AP is also responsible for clearly communicating this plan to the lifting team, using comprehensive documentation and clear instructions. Studies of lifting operation incidents have identified poor planning as a leading cause of accidents, highlighting the critical importance of proper preparation and communication in preventing mishaps.

The AP's core responsibility is to develop the Lift Plan, which includes:
  • Site Survey & Hazard Identification: Analyzing the working environment.
  • Risk Assessment (RA): Identifying risks and establishing control measures.
  • Load Analysis & Calculation: Accurately determining load weight, Center of Gravity (COG), and sling tensions.
  • Crane Selection & Siting: Choosing the correct crane and planning its location, paying attention to Load Charts and Ground Bearing Pressure.
  • Communication: Clearly briefing the lifting team (Slingers, Signallers, Supervisors) on the procedure.

A LEEA-certified AP transitions from a supervisory role to an Expert Planner and Risk Manager.

What are the Course Requisites?

This is an advanced technical skills course, not a beginner's introduction. To ensure safety and maximize learning outcomes, prior hands-on lifting experience is strictly required. Without a foundational understanding of rigging and lifting principles, candidates will struggle with the complex calculations and lift planning assessments.

  • Requiring a minimum of 4 years of experience in lifting operations or individuals holding Rigging and Slinging Training/Lifting Supervisor Certificate with at least one year of experience. You need to have experienced the variables of a live site to correctly apply the lift planning principles.This ensures you have core knowledge of accessories, signals, and supervisory duties.
  • Proficiency in English language skills (reading, writing, and speaking), the course material, legislation, lift plans, and final assessment are all conducted in English.
This course is intended for:
  • Personnel engaged in planning and supervision of lifting activities
  • Those required to conduct risk assessments and lifting plan under lifting operations regulations.

Important: We emphasize learning the skill to plan a critical lift rather than just receiving a certificate. Our strict screening process ensures every candidate has the practical background necessary for success.

For Official Course Enquiries and Quotation Requests:
marketing@talentuae.ae
Mail
icon
icon
The BEST Accredited Training Provider for LEEA Courses!!

Choosing the LEEA Appointed Person for Lifting Operations (APLO) course at Talent Training Institute means selecting a proven pathway to mastery, not just a paper qualification. We are the best LEEA Provider, ensuring you receive world-class training led by seasoned, certified instructors. Our comprehensive, 5-day program ensures you gain the competence required for this critical role, improving safety and elevating your career in lifting operations.

Join THE COURSE
icon
background
icon
icon
icon
icon
icon
icon
Flexible Training Modes: Your Choice, Our Expertise

LEEA Appointed Person Course: Face-to-Face  and Hybrid Learning mode ( 03 days online & 02 dyas ofline)

We offer flexible delivery modes, all accredited by LEEA and led by our seasoned, LEEA-certified instructor:

  • Hybrid Learning: 5 Days Total: 3 Days Online (Theory, Calculations, Lift Plan Exercise via TEAMS) + 2 Days Face-to-Face (Practical, Live Lift Simulation, Assessments). Maximizing convenience while retaining essential hands-on training for practical lift planning and site survey duties.
  • Full Face-to-Face: 5 Days, All theory, practical exercises, and assessments conducted at our state-of-the-art training center in the Abu Dhabi, UAE.
  • 5 Days: We can dispatch our expert LEEA instructor and required training materials to your company's facility anywhere in the world for a dedicated group.

Note: All online students must ensure a stable internet connection and have a graph paper and scale ruler for the crucial lift plan exercises.

 
icon
Course Content

 

  • Introduction
  • Legislations & Key Definitions
  • Crane Types & Crane Terminologies
  • Crane Components & Maintenance Site Survey & Risk Assessment
  • Lift Plan, Method Statement & Siting of Cranes
  • Assessment of Loads and COG Calculations
  • Classification of Lifting Operations & Crane SelectionLoad Charts, Wind Speed, Capacity Downrating & Good Operations Practice
  • Lifting Accessories Practical & Assessments Carrying out a site survey
icon
icon
icon
  • Prepare Risk assessment and method statement
  • Assessing loads and select correct lifting accessories
  • Ensure that pre-use checks been done by the crane operator, slinger, and signalers
  • Ensure that “No-Go Zone” has been established
  • Briefing the lifting team
  • Supervise the siting and setup of the crane according to the lift plan
  • Supervise the lifting operation
  • Ensure the safety completion of the operation and supervise the correct stowing of the crane
  • Carry out a slinger & signaler duty during the lifting operation
  • Written Examination.
icon
icon
icon
image
Building Competence, Not Theory

In the lifting industry, a certificate without proven competence is not just useless—it is a safety risk. The Appointed Person (AP) role is one of the most critical in the industry, directly responsible for human life and millions in equipment. You cannot be fooled by cheap certificates; this role demands verifiable, skill-based training. Our curriculum is specifically designed to move beyond simple memorization, focusing instead on the real-world application of skills required to pass the stringent LEEA assessment and operate competently on any site. We train you to be a Critical Lift Planner capable of genuine risk mitigation.

The LEEA APLO course focuses on turning technical knowledge into immediate, practical competence. Upon completion, you will be able to perform these critical tasks:

  • Master the preparation of a compliant Site Survey, a comprehensive Risk Assessment, and the detailed Lifting Method Statement for any operation.
  • Accurately perform load estimation and calculate the Center of Gravity (COG) for complex or asymmetrical loads.
  • Interpret and apply Load Charts (duty radii, height of lift, SWL, multiple duties). Understand capacity downrating due to wind speed and ground conditions.
  • Select the correct Lifting Accessories (slings, shackles, etc.) and calculate sling tension and angle factor to prevent overloading.
  • Supervise the crane setup (siting), establish the "No-Go Zone," conduct a team briefing, and supervise the live lifting sequence.
icon

FAQ

LEEA (Lifting Equipment Engineers Association) is a globally recognized organization that sets the standards for safe and competent lifting operations. LEEA qualifications ensure that lifting professionals have the skills and knowledge to perform lifting tasks safely, reducing the risk of accidents and ensuring compliance with international safety regulations.

LEEA qualifications are ideal for anyone involved in lifting operations, including lifting supervisors, riggers, crane operators, and health and safety professionals. It is especially beneficial for those seeking to improve their expertise, safety knowledge, and job prospects in the lifting industry.

This course is suitable for individuals who are involved in planning, organizing, or supervising lifting operations, such as site managers, supervisors, and safety officers, those who have a strong understanding about the lifting operations.

 

Yes, LEEA qualifications are recognized internationally as a mark of excellence in the lifting and transport industry.

The Appointed Person (AP) is responsible for planning, overseeing, and ensuring the safe execution of lifting operations. According to standards like LOLER 1998 and BS 7121, the AP must develop a detailed procedure that aligns with best practices and regulatory requirements. While the AP can delegate tasks to others, such as the crane or lifting operations supervisor, they retain overall responsibility for the safety and success of the operation. Effective communication with the lifting team is essential, using clear instructions and documentation. Poor planning has been identified as a key cause of lifting incidents, emphasizing the AP's critical role in thorough preparation.

Under LOLER 1998 Regulation 8, all lifting operations must be planned by a 'Competent Person'. BS 7121 (Code of Practice for Safe Use of Cranes) clarifies that the internationally recognized title for this planning role is the 'Appointed Person (AP)'. While the AP can delegate tasks (like supervision or signaling), they retain ultimate legal responsibility for the entire process, including the preparation of the Risk Assessment (RA) and the Lifting Method Statement. The AP is the singular point of accountability.

The AP’s duty under PUWER is to ensure that the lifting equipment (the crane, hoists, etc.) and lifting accessories (slings, shackles, etc.) are suitable for the purpose and are only used under safe conditions laid out in the lift plan. This includes verifying that the equipment is routinely inspected, maintained, and subjected to thorough examinations by a competent third party, ensuring it is fit for use before the operation begins.

The Center of Gravity (COG) determines the stability of the load. A crane hook will always seek to place itself vertically above the load's true COG. If the AP's rigging configuration (sling lengths, lifting points) does not match the actual COG of the load (especially for asymmetrical or hollow loads), the load will immediately tilt and swing violently upon lift-off. This uncontrolled movement leads to dangerous side-loading on the crane boom and potential sling failure. The AP must calculate the exact COG and adjust sling lengths accordingly to ensure a stable, level lift.

Sling tension dramatically increases as the angle between the sling leg and the vertical load decreases (a smaller included angle). The AP uses a Tension Factor (TF) derived from trigonometry to calculate the actual stress on each leg:

  • Tension per Leg = (Load Weight / Number of Legs) x Tension Factor (TF)

For example, a load that requires 5 tonnes of capacity per leg in a vertical lift suddenly requires 5.775 tonnes per leg if rigged at a 60° included angle (TF = 1.155). The AP must ensure the chosen sling's Working Load Limit (WLL) is greater than this calculated tension.

The capacity on the Load Chart is an absolute maximum under ideal conditions. The AP must downrate (reduce) this capacity by considering:

  1. Wind Speed: Wind force acts dynamically on the load and boom, especially for large, sheet-like structures. Most crane operations require a halt or capacity reduction above 20 knots (approx. $10 m/s).
  2. Dynamic Effects: Factors are applied for unexpected movements (e.g., snatch loading or lifting in high-vibration areas).
  3. Multiple Part Reeving: Ensuring the maximum rope pull limit is not exceeded, which can reduce the crane's usable capacity.
  4. Configuration: Whether the lift is over the side, over the rear, or uses an eccentric reeving configuration.

Contact Us